Brief Introduction to Inspection Work of Finger Biscuit Machine Equipment
The inspection work of the finger biscuit machine equipment is now analyzed for everyone. The finger biscuit machine equipment produces delicious biscuits for the children. Contaminants generated or invaded during use and maintenance; it can also be applied to regular maintenance and filtration of working fluid, improve cleanliness, avoid or reduce failures caused by pollution, so as to ensure the high performance and high reliability of hydraulic system equipment Degree of life.
1. When operating the high-pressure cleaner: Always wear appropriate goggles, gloves and masks.
2. Always keep hands and feet away from the cleaning nozzle.
3. Always check all electrical connections.
4. Check all liquids frequently.
5. Frequently check the hose for cracks and leaks.
6. When the spray is not in use, always set the setting in a safety lock state.
7. Always use low pressure to work as much as possible, but the pressure must be sufficient to complete the work.
8. Before disconnecting the hose, always release the pressure in the washing machine.
9. Always drain the water in the hose after each use.
10. Never spray the spray on yourself or others.
11. Never start the equipment before checking that all hose connections have been locked in place.
12. Never start the equipment before turning on the water supply and allowing proper water to flow through the boom. Then connect the required cleaning nozzle to the spray bar.
When using the finger biscuit maker equipment, maintenance is an important step for people. The finger biscuit maker equipment can be stirred and mixed evenly during operation; electromagnetic heating is energy-saving and environmentally friendly, saving electricity than ordinary electric heating, heating up quickly, and temperature is controllable; using finger biscuit maker The equipment is made of stainless steel, beautiful in appearance, compact in structure and easy to clean.
Leave a Message :::