No-load operation is sometimes used when the biscuit production line is in use. However, in order to better meet the no-load operation requirements of the equipment, when the biscuit production line is no-load operation, in order to ensure the integrity of the equipment, it must be carried out in strict accordance with its precautions. Operate, so as to avoid operating errors, resulting in equipment damage and reduced use efficiency. To ensure the performance and safety of the biscuit production line, it is necessary to carry out relevant performance debugging before the equipment is used, so that all relevant requirements are in compliance with the use standards, and then materials can be added, so that the relevant requirements can be processed to avoid accidents. The situation happened.
1. The equipment should be fixed on a flat workbench when in use. Generally, the height of the workbench needs to be determined by the actual production requirements, and the equipment and the periphery of the workbench also need to be certain. It’s more convenient to use and maintain.
2. During installation, some drive shafts and the ground need to be adjusted to maintain a level position, but the overall inclination should be controlled under the premise that the biscuit production line can operate normally.
3. The qualified parts and components of the equipment need to be checked whether they are suitable for the equipment to match each other.
4. When the equipment is debugged after installation, it is necessary to check whether there are any problems with the connections between its various parts, and all parts of the equipment should be tested when it is used. It should be done during the experiment. There are no bubbles or dripping.
5. When debugging, you need to add a proper amount of mechanical oil to it for use.
The biscuit production line equipment can not only fulfill the needs of the enterprise, but also effectively improve the efficiency of the equipment, reduce the occurrence of failures, and extend the service life of the equipment. When we perform related performance debugging on the biscuit production line, we must strictly follow the prescribed operating standards, and for new equipment, we must be particularly careful in all aspects of debugging, so as to avoid use errors and lead to unexpected situations.
Leave a Message :::