Several problems to be aware of when using the cake machine
1. Plug and unplug the power plug. Be careful to keep the position of the plug. Do not pull on the power cord to avoid damage to the power cord.
2.Do not let the power cord hang from the corner of the table, the threshold and other sharp places, do not let the power cord close to the heating objects, stoves, heaters, etc.
3. When using the cake machine, flatten it, do not tilt it, so as to prevent oil from being exposed, and keep it within the control range during use.
4. Don't let the children operate by themselves. When collecting, put them in a place that children can't easily touch.
5.When cleaning, you can use a small brush or a damp cloth, wash the internal heating plate with water, avoid direct washing, or directly soak in the water
6. When the product power cord is damaged, do not use it and have it replaced by a professional.
When making a cake, the mold should be kept well, and the cake machine mold often stops for a few months. Some molds are very rusty, so how to make the cake machine mold better preserved. After the cake machine mold is finished, the mold surface can be blue or black. After the surface treatment, the Cake production line mold is not easy to produce. Rust. After the mold is used, the surface of the mold should be oiled. In addition, when the mold is stored, a small mold can be placed on the shelf, a large mold is placed on the ground, and a wooden board is placed underneath, so that the mold is not easily rusted.
Leave a Message :::